27

2023

/

04

Correct procedures for using grass grabbing machines

Correct procedures for using grass grabbing machines: 1. Drivers mus∏t undergo technical training to familiarize themselves with the performance, construction, operati™on, and maintenance of loaders and grass grabbers. 2. It is strictly prohibited for drivers wΩho are drunk or have mental disorders to operate the machine,φ and it is strictly prohibited to drive with illness or fatigue. 3. During drivin•g operations, drivers need to concentrate and not look left or right. The₹y should pay attention to the direction of travel and those working around them, and s©ound the horn to warn when there is danger. 4. During driv★ing operations, passengers in the driver's cab are not allowed to overload, and pass engers are strictly prohibited from other parts. 5. Before and after daily op erations, a walkaround inspection is required to ensure the >guarantee of operations. 6. Before starting, check the conditi₽on of fuel, cold water, lubricating oil, and hydraulic oil. If there is a leak, promptly h<andle it, and if there is a lack, adjust and supplement it in a ∑timely manner. 7. Check if all connecting parts are worn or loose. Check if the tire pressu₽re meets the regulations. Check the tension of the fan belt and check ✔the air filter indicator. 8. Check whether the lighting, instrument​s, horns, and other components are normal. 9. The engine should not start for more tha‍n 5 seconds each time. If one start is unsuccessful, it must  wait for 30 seconds before starting again. If three starts are unsuccessful, the cause should be cεhecked and the fault should be resolved before starting again. 10. After start'ing, idle and idle the engine to check if all instruments are normal. If there are any abnormal>ities, stop the engine immediately to check the cause. The driver c&an only operate when the buzzer "beeps" and disappears without any abnor↔mal vibration, noise, or odor. 11. Before operation, test the equipment a₹nd check if the steering, braking, and working systems¥ are sensitive. 12. During driving, it is necessary to regularly pay attention t☆o whether the index of each instrument meets the specified requirements. 13. €When traveling, place the bucket at a height of about 0.5m above t∑he ground; Do not lift the bucket too high to transport materialsφ; Do not lift the bucket while driving. 14. When working on slopes or crossing↓ obstacles such as ditches, slow down, make small corners, and be careful not to tip over. Advance  uphill and retreat downhill.

27

2023

/

04

Diagnosis and elimination of agricultural machinery faults

The diagnosis and troubleshooting of agricultural machinery faults is relatively di≥fficult. Some maintenance personnel have always used the methoεd of replacement testing, regardless of the large or small parts, as long as they b§elieve that the components that may cause the fault are  replaced one by one, the results not only fail to eliπminate the fault, but also replace the parts that should not be repl→aced at will, increasing the expenses of agricultural m×achinery users. Some faulty components can be completely restored" to their technical performance through repair, without the nee₽d for complex repair processes. However, maintenance personnel require users to repla₩ce them with new parts and blindly adopt the "replacement repair" method, resulting in ↔serious waste. The practice of blindly replacing parts and blindly replacing repairable parts me§ntioned above still exists to varying degrees in some repai★r units. During maintenance, the cause and location o↕f the fault should be carefully analyzed and judged based on theδ fault phenomenon. For repairable components, repair methods should be adopted to restore technica l performance, and blind replacement of components should be avoi∑ded. Failure to check the quality of new parts after assembly is a common issue Befo∞re replacing the parts, some maintenance personnel do nσot conduct technical inspections on the new parts and install t₽hem directly on agricultural machinery. This approach is un™scientific. At present, the quality of agricultural machinery spare parts s≤old in the market is uneven, with some counterfeit and inferior parts bei♠ng mixed up; There are also some accessories whose performance changes due to≥ long inventory times, such as not being tested, which often cause malfunctions after assembly.↕ Before replacing with new accessories, it is necessary to conduct↑ necessary inspections and tests, including appearance and performance tests, to ensure♣ that the new accessories are faultless and prevent unnecessary trouble caused by them.

27

2023

/

04

Operating Procedures for Small Forklifts and Grass Grabbers

(1) Before driving and operating, operators should be× familiar with the various performance, structure, technical maintenance, operating methods, and$ operate the loader according to regulations. (2) Passengers are strictly prohibited on boa•rd except outside the driver's cabin. (3) When unloading int≥o the car, lift the bucket to a height that will not touch the car bumper, strictly prδevent the bucket from touching the car trunk, and strictly prohibit the bucket from crossing the t×op of the car cab. (4) When going downhill, use automatic‌ deceleration and do not step on the clutch pedal to prevenσt power cutoff and car slipping accidents. (5) After the l₽oader wades into water, it should be immediately stopped for inspection. If it is f ound that the brake fails due to immersion, continuous braking shou≥ld be carried out to use heat to remove moisture from the brake pads, in order to restore∏ the brakes to normal as soon as possible. (6) When the loader is worki€ng, no one is allowed to stand in front of it, and during the driving p¥rocess, the bucket is not allowed to carry people. (7) During work, it is strictγly prohibited to stand under the shovel arm, and unrelated personnel and other machinery are proh♦ibited from working and passing through here. (8) High speed o≤peration is strictly prohibited. (9) When the operator leaves the dδriving position, land the bucket, turn off the engine, and c•ut off the power.

27

2023

/

04

< 12 >