Correct procedures for using grass grabbing machines

Correct procedures for using grass grabbing machines: 1. Drivers γmust undergo technical training to familiarize the✔mselves with the performance, construction, operation, and maintenance of loaders and grass grabber→s. 2. It is strictly prohibited for drivers who are drunk or have mental disor$ders to operate the machine, and it is strictly prohibited to drive with illness or fatigue. 3&. During driving operations, drivers need to concent≤rate and not look left or right. They should pay attention to the dire¶ction of travel and those working around them, and sou→nd the horn to warn when there is danger. 4. During driving operaδtions, passengers in the driver's cab are not allowed to overload, and pass↔engers are strictly prohibited from other parts. 5. Before and after daily operations, a walka≈round inspection is required to ensure the guarante​e of operations. 6. Before starting, check the condition of fuel, cold wate♣r, lubricating oil, and hydraulic oil. If there is a leak, promp§tly handle it, and if there is a lack, adjust and sup"plement it in a timely manner. 7. Check if all connecting parts are worn or loose. Check if t"he tire pressure meets the regulations. Check the tension ✘of the fan belt and check the air filter indicator. 8. Che♣ck whether the lighting, instruments, horns, and other compon↕ents are normal. 9. The engine should not start for☆ more than 5 seconds each time. If one start is unsuccessful, iδt must wait for 30 seconds before starting again. If three starts are unsuccessful, the cau★se should be checked and the fault should be resolved before <starting again. 10. After starting, idle and idle the engine to check if aεll instruments are normal. If there are any abnormalities, stop the engine i‍mmediately to check the cause. The driver can only operate when theφ buzzer "beeps" and disappears without any abnormal vibrat★ion, noise, or odor. 11. Before operation, test the equipment and check if the steering, brakiπng, and working systems are sensitive. 12. During driving, it is necessary to regulaδrly pay attention to whether the index of each instrument meets the >specified requirements. 13. When traveling, place the bucket at a₽ height of about 0.5m above the ground; Do not lift the bucketφ too high to transport materials; Do not lift the bucket♥ while driving. 14. When working on slopes or crossing obstacles su≤ch as ditches, slow down, make small corners, and §be careful not to tip over. Advance uphill and retreat downhill.

27

2023

/

04

Diagnosis and elimination of agricultural machinery faul↔ts

The diagnosis and troubleshooting of agricultural m≠achinery faults is relatively difficult. Some maintenance personnel have ≤always used the method of replacement testing, regardless of the large or small λparts, as long as they believe that the components that may cause the fault are repla>ced one by one, the results not only fail to eliminate the fault, but also replace t​he parts that should not be replaced at will, increasing the expenses of agricultural machinery use£rs. Some faulty components can be completely restored to their ≠technical performance through repair, without the need for complex& repair processes. However, maintenance personnel require users to replace them Ωwith new parts and blindly adopt the "replacement repair" method,♦ resulting in serious waste. The practice of blindly replacing parts and blindly replaci​ng repairable parts mentioned above still exists to varying degrees in some repair ♥units. During maintenance, the cause and location of the fault should be carefully analy₩zed and judged based on the fault phenomenon. For repairable components, repair methods shouldγ be adopted to restore technical performance, and blind↕ replacement of components should be avoided. Failure to check the qualitδy of new parts after assembly is a common issue Before r∏eplacing the parts, some maintenance personnel do not conduct technical inspections on✔ the new parts and install them directly on agricultural machinery. This approπach is unscientific. At present, the quality of agricultural machinery spare parts sold i×n the market is uneven, with some counterfeit and inferio©r parts being mixed up; There are also some accessories whose pe©rformance changes due to long inventory times, such as not being tested, whi↑ch often cause malfunctions after assembly. Before replacing with new accessories, it is nece★ssary to conduct necessary inspections and tests, including appeβarance and performance tests, to ensure that the new a≥ccessories are faultless and prevent unnecessary trouble caused by them.

27

2023

/

04

Operating Procedures for Small Forklifts and Grass Grabbers

(1) Before driving and operating, operators should be familiar with the various perfor mance, structure, technical maintenance, operating methods, and operate the loader according t♥o regulations. (2) Passengers are strictly prohibited on board except outside the driver's &cabin. (3) When unloading into the car, lift the bucket to a height that will not touch  the car bumper, strictly prevent the bucket from touching th↕e car trunk, and strictly prohibit the bucket from crossing the top of the car cab. (4)× When going downhill, use automatic deceleration and do not step on theλ clutch pedal to prevent power cutoff and car slippin>g accidents. (5) After the loader wades into water, it should be immediately stopped for ins↕pection. If it is found that the brake fails due to immersion, continuous braking should be carrie∑d out to use heat to remove moisture from the brake pads, in order to r™estore the brakes to normal as soon as possible. (6) When the loader is work♥ing, no one is allowed to stand in front of it, and during the driving ₹process, the bucket is not allowed to carry people. (7) During work, it is stri♥ctly prohibited to stand under the shovel arm, and unrel±ated personnel and other machinery are prohibited from workin♣g and passing through here. (8) High speed operation" is strictly prohibited. (9) When the operator leaves∏ the driving position, land the bucket, turn off the engine, and cut off the p•ower.

27

2023

/

04

< 12 >