Correct procedures for using grass grabbing machines

Correct procedures for using grass grabbing machines:
1. Drivers must undergo technical training to familiarize themselves with the perfo€rmance, construction, operation, and maintenance of loade↔rs and grass grabbers.
2. It is strictly prohibited for drivers who are drunk or have mental disorders to operate the¥ machine, and it is strictly prohibited to drive with illness ₹or fatigue.
3. During driving operations, drivers need to concentrate and not look left or right. The±y should pay attention to the direction of travel and✘ those working around them, and sound the horn to warn when ₩there is danger.
4. During driving operations, passengers in the driver's cab are not alloweπd to overload, and passengers are strictly prohibited from other parts.
5. Before and after daily operations, a walkaround inspecσtion is required to ensure the guarantee of operations.
6. Before starting, check the condition of fuel, cold water, lubricating oil, and​ hydraulic oil. If there is a leak, promptly handle it, and if there is a lack, adjust and suδpplement it in a timely manner.
7. Check if all connecting parts are worn or loose. Check if the tire pβressure meets the regulations. Check the tension of the fan belt and check the air filter indicatoγr.
8. Check whether the lighting, instruments, horns, and other components are‍ normal.
9. The engine should not start for more than 5 seconds each time. If one start is •unsuccessful, it must wait for 30 seconds before starting again. If three βstarts are unsuccessful, the cause should be checked and the fault should be resolve←d before starting again.
10. After starting, idle and idle the engine to check if all♠ instruments are normal. If there are any abnormalities, stop the engine immediaβtely to check the cause. The driver can only operate when the buzzer "beeps&qu∑ot; and disappears without any abnormal vibration, noise, or odor.
11. Before operation, test the equipment and check if the steering, braking, an>d working systems are sensitive.
12. During driving, it is necessary to regularly pay attention to whether the index of each ins'trument meets the specified requirements.
13. When traveling, place the bucket at a height of about 0.5m above the ≤ground; Do not lift the bucket too high to transport materials; Do not₹ lift the bucket while driving.
14. When working on slopes or crossing obstacles such as ditches, slow down, make small cornπers, and be careful not to tip over. Advance uphill and retreat downhill.