2023

Do you know how the bucket of a forklift is made?

Author:

1. The bucket of a forklift includes a bucket, which ↔includes a loading chamber and an equipment chamber. The loading chamber and t‍he equipment chamber are separated by a fixed plate;
2. The bucket teeth are fixedly connected to the front end of the ‍bucket, and the inclined plate is fixedly welded to∑ the top of the bucket;
3. The three hydraulic telescopic devices are locat<ed in the equipment cavity, and are horizontally arranged and fixedly conneπcted to the rear side of the bucket;
4. The fixed sleeve is fixedly connected to the telescopic end of the three hydraulic teleεscopic devices, and the fixed sleeve is fixedly connected to th'e air hammer;
5. The fixed plate is equipped with a passage corresponding to the♠ air hammer, and two rotating doors are set on the passage, both of which₹ are rotatably connected to the fixed plate;
6. The top end of the outer bucket and the inclined pla÷te are fixed with connection seats; Louver manufacturer
7. The two connecting seats rotate to connect the first and second hydraulic expansion↓ devices, and the fixed ends of the first and second hydraulic expansion devices are fixed ly connected to the forklift outside the bucket;
8. The tilting block is fixed at the bottom of the equ≠ipment chamber, and the discharge outlet is arranged on the bucket on 'one side of the tilting block;
9. The rubber buffer pad is located at the connection between the air hammer and t£he fixing sleeve;
10. The torsion spring is located at the connection between the rotating door and the fixing ★plate.