Tillage and land preparation machinery

Correct procedures for using grass grabbing machines

Correct procedures for using grass grabbing machines: 1. Drivers ←must undergo technical training to familiarize themselves with the↔ performance, construction, operation, and maintenance of loaders and gras÷s grabbers. 2. It is strictly prohibited for drivers who are drunk or have mental diso​rders to operate the machine, and it is strictly prohibited to drive with i‌llness or fatigue. 3. During driving operations, dr ivers need to concentrate and not look left or right. They should pay attention t♠o the direction of travel and those working around them, and sound the horn to warn when the₹re is danger. 4. During driving operations, passengers in the driver' ;s cab are not allowed to overload, and passengers are strictly prohibited from other parts. σ5. Before and after daily operations, a walkaround inspection is required to ensur$e the guarantee of operations. 6. Before starting, checkφ the condition of fuel, cold water, lubricating oil, and hydraulic oil. If there is a l¶eak, promptly handle it, and if there is a lack, adjust and supplement it in a timel¥y manner. 7. Check if all connecting parts are worn or loose. Check ¥if the tire pressure meets the regulations. Check the tension of the fan belt and check th♠e air filter indicator. 8. Check whether the lighting, instrument¥s, horns, and other components are normal. 9. The engine should not start for more£ than 5 seconds each time. If one start is unsuccessful, ✔it must wait for 30 seconds before starting again. If three starts are unsuccessful, the πcause should be checked and the fault should be resolved before starting again. 10.π After starting, idle and idle the engine to check if all instruments are normal. If ‌there are any abnormalities, stop the engine immediately to check ≠the cause. The driver can only operate when the buzzer "beeps" and disappear®s without any abnormal vibration, noise, or odor. 11. Before  operation, test the equipment and check if the steering, ←braking, and working systems are sensitive. 12. During driving, it is necessary to regula≤rly pay attention to whether the index of each instrument meets the sp♦ecified requirements. 13. When traveling, place the bucket at a height of≠ about 0.5m above the ground; Do not lift the bucket too high to transport materials; Do not lif€t the bucket while driving. 14. When working on slopes or crossing obstacles such as ditc₹hes, slow down, make small corners, and be careful not to tip over. Advance uphill and retreat¶ downhill.